LIVARNO LUX 55081, Assembly, Operating And Safety Instructions

Page: 20 / 70

20 GB/IE
Replace the fuse or switch on the circuit breaker
(I setting) inside the fuse box.
Your ceiling fan with LED light is now ready to use.
Initial use
Switching the lamp on / off
Pull on the pull switch
4
to switch the light on.
Pull on the pull switch
4
again to switch the
light off.
Switching the fan on
Pull on the pull switch
6
to switch the fan on.
The fan will run at high speed.
Pull on the pull switch
6
again. The fan will
run at medium speed.
Pull on the pull switch
6
again. The fan will
run at low speed.
Pull on the pull switch
6
again to switch the
fan off.
Setting up clockwise /
anticlockwise rotation (fig. J)
CAUTION! RISK OF INJURY! Always
switch the fan off and wait until it is still before
using the rotation direction switch
3
. Operat-
ing the rotation direction switch while the fan is
on can lead to injuries and / or material damage.
In low temperatures, flip the rotation direction
switch
3
upwards. The fan will distribute the
warmth in the room.
In high temperatures, flip the rotation direction
switch
3
downwards. The fan will create a
cooling flow of air.
Inserting / replacing the
light bulb
DANGER OF ELECTRIC
SHOCK! Before changing light bulbs, ensure
that the circuit to which the ceiling fan with LED
light is connected is not live. To do so, remove
the fuse or switch off the circuit breaker in the
fuse box (0 setting).
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES!
Allow the lamp to cool down
completely.
Loosen the lampshade
7
thumb screws
20
and
remove them carefully.
Turn the defective light bulb
19
anti-clockwise
out of the bulb socket.
Use a clean, lint-free cloth to replace the bulb.
Screw the new light bulb
19
clockwise into the
socket.
Please refer to the chapter “Technical data“ to
find out which light bulb is required.
Attach the lampshade
7
. Use the thumb screws
20
for this (see fig. I).
Replace the fuse or switch on the circuit
breaker (I setting) inside the fuse box.
Maintenance and cleaning
WARNING! DANGER OF ELECTRIC
SHOCK!
Always disconnect the product
from the mains before cleaning. To do
so, remove the fuse or switch off the circuit breaker
in the fuse box (0 setting).
WARNING! DANGER OF ELECTRIC
SHOCK!
For electrical safety reasons,
never clean the ceiling fan with LED light
using aggressive cleaning agents or immerse it in
water.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES!
Allow the lamp
to cool down completely.
Do not use solvents, petrol, etc. These will
damage the ceiling fan with LED light.
Only use a dry, lint-free cloth for cleaning.
Replace the fuse or switch on the circuit
breaker (I setting) inside the fuse box.