LIVARNO LUX 313354_1904, Operation And Safety Notes

Page: 14 / 47

14 GB/IE
Maintenance and cleaning / Disposal / Warranty and service
Only insert the light bulb in a dry
environment.
This lamp is not suitable for external
dimmers and electronic switches.
Safe working
Position the lamp so it is protected from moisture
and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the illuminant from a close
distance during operation.
Do not use optical instruments to look at the
illuminant.
In order to disconnect the light completely from
the power supply, the mains plug must be
removed from the socket.
Only use the light bulbs specified in the chapter
“Technical data“.
Initial use
Mounting the lamp
Note: Remove all packaging materials from the
product.
Only 14135306L:
Caution: The lamp glass
2
and the ring nut
1
are pre-assembled, but are not screwed tight.
Bring the lamp glass
2
into the correct position.
Only 14135402L:
Loosen the ring nut
1
from the lamp socket
3
.
Bring the lamp glass
2
into the correct position.
All models:
Screw the lamp glass
2
to the ring nut
1
.
Be sure they are positioned correctly.
Use a clean, lint-free, dry cloth to insert the
bulb
5
.
Screw the light bulb
5
clockwise into the lamp
socket
3
.
Plug the mains plug
4
into a properly installed
socket.
Your light is now ready to use.
Switching the light on / off
Touch the lamp base
6
to switch the lamp on
or off.
Dimming the lamp
Note: The lamp is only dimmable using the light
bulb
5
supplied.
To dim the light bulb
5
touch the lamp base
6
multiple times in short succession.
Changing the light bulb
Switch the lamp off.
RISK OF ELECTRIC SHOCK!
First unplug the mains plug
4
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Use a clean, lint-free, dry cloth when replacing
the illuminant
5
.
Unscrew the defective illuminant
5
from the
lamp socket
3
, turning counter-clockwise.
Screw a new illuminant, clockwise into the
lamp socket
3
.
Plug the mains plug
4
into a properly installed
socket.
Your light is now ready to use.
Maintenance and cleaning
Switch the lamp off.
RISK OF ELECTRIC SHOCK!
First remove the mains plug
4
from the socket.
Safety / Initial use / Changing the light bulb / Maintenance and cleaning