10 GB/IE/NI
pre-adjustments are made using the two control-
lers on the underside of the motion detector
10
(Fig. C).
Setting the lighting duration
Turn the TIME rotary control
19
on the bot-
tom side of the motion detector
10
clockwise
to increase the duration of illumination. The
lighting duration can be adjusted within a
time window of approx. 10s +/- 5s –
4 min +/- 1min.
Setting the daylight level
Turn the LUX rotary control
20
on the bottom
side of the motion detector
10
clockwise to
increase the daylight level: In the position,
the motion detector only reacts at night (at
approx. 20 lx). In the position, the motion
detector also responds at daylight levels, as
long as about 20,000 lx are not exceeded.
Aligning the motion detector
Note:
Perform this adjustment at twilight.
Loosen the locking screw (motion detector)
9
.
Turn the LUX rotary control
20
to position .
Align the motion detector
10
into the central
region of the desired coverage area.
Move about through the coverage area until
you are satisfied with the response
characteristics of the motion detector
10
. To
find the proper orientation, change the orien-
tation of the motion detector
10
.
When you have aligned the motion detector
10
satisfactorily, re-tighten the locking screw
9
to fix the adjustment.
Cleaning and Care
Before cleaning, remove the fuse or switch off
the circuit breaker at the fuse box.
Never immerse the product in water or other
liquids. Otherwise the product can be
damaged.
Clean the product with a lint-free, slightly
moist cloth and mild cleaning agent.
Re-install the fuse for this circuit or switch on
at the circuit breaker (I position) in the fuse
box.
Disposal
The packaging is made entirely of recyclable ma-
terials, which you may dispose of at local recy-
cling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
