12 GB
fastening the fixing screws. Use the pliers to tighten the cord anchorage
14
on the cord (Fig. D). Fix the cord by turning the nut of the cable
gland
13
(Fig. E).
Place the protection plastic cover
18
on the terminal block
15
(Fig. F).
Make sure the seal ring
17
is correctly fit on the connection box
6
before close (Fig. D).
Close the connection box
6
again by fastening the fixing screws
12
(Fig. G).
Wall Mounting
Place the mounting bracket
5
on the wall and mark the fastening holes
for the mounting bracket.
Now drill the fastening holes (Ø 8 mm) and push the wall plugs
1
into
the drill holes.
Insert the included screws
3
into the washers
2
(Ø 20 mm).
Fix the mounting bracket on the wall using the screws provided.
Align the spotlight
4
into the desired direction. For this, you may need
to slacken the locking screws
7
of the hinge joint. After alignment,
tighten the locking screws of the hinge joint again, to ensure a secure
hold.
Mounting with ground stake
Loosen the knurled screws
11
of the ground stake
10
and secure the
ground stake, using the knurled screw, onto the middle hole of the
mounting bracket
5
.
Summary of Contents for 288476
Page 3: ...A 5 6 11 10 8 4 2 3 1 B 6 9 7 12...
Page 4: ...E 15 C D 14 13 16 17...
Page 82: ...F G 18...
