15
GB/IE
Introduction
Introduction / Safety
5
Wall plug
6
Drill hole markers (1, 2, 3)
7
Mains connection cable (external)
8
Terminal block
9
Screw holes
10
Retaining bolts
11
Adhesive labels
12
LED Ceiling lights
Remote control:
13
ON button (lighting)
14
OFF button (lighting)
15
button
16
Dimmer – button
17
30 minute timer button
18
OFF button (audio)
19
button
20
Select song button (next)
21
Pause / Bluetooth Connection Standby button
22
Select song button (previous)
23
Volume – button
24
ON button (audio)
25
Screws (Wall mount)
26
Wall bracket (remote control)
27
3M-Self-adhesive pad
Technical Data
Item no.:
9000.034.080
Operating voltage:
220–240 V∼,
50 / 60 Hz
Power:
max. 24 Watt (speaker
max. 6 Watt)
Protection class:
I /
Protection type:
IP20
Dimensions:
Ø approx. 40 cm,
height approx. 8 cm
Frequency range
Speaker:
120–20,000 Hz
Bluetooth version:
4.0
Bluetooth range:
approx. 9 m
Control method
Remote control:
infrared
Remote control range:
5–6 m
Safety
Safety instructions
Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
liability for property damage or personal injury due
to improper handling or failure to comply with the
safety instructions! Do not leave the lamp or packag-
ing material lying unattended. Plastic film or bags,
plastic parts, etc. can be dangerous for children to
play with.
Avoid the risk of fatal injury
from electric shock
Have the electrical installation performed by
an electrician or a person trained in electrical
installation.
Always check the mains supply for damage be-
fore connecting it to the mains. Never use the
light if it shows any signs of damage.
CAUTION!
A damaged mains cable poses a
danger to life due to electric shock. In the event
of damage, repairs or other problems with the
light please contact the service centre or an
electrician.
Prior to installation, remove the fuse or switch off
the circuit breaker (0 setting) in the fuse box.
Prior to installation, verify the mains voltage on
site corresponds with the operating voltage re-
quired for the light (220–240 V∼, 50 / 60 Hz).
Never allow the light to come into contact with
water or other liquids.
Never open the housing of the light or insert
any objects into it. This will pose a risk of fatal
injury from electric shock.
The LED module is not replaceable. If the LED
module fails at the end of its life, the entire light
must be replaced.
Do not install the light on a wet or conductive
surface!