30 GB/IE
The connection terminal has to fulfill the requirements of the DIN
EN 60998-2-1 or DIN EN 60995-2-2. The kind of connection has
to fulfill the local and national requirements.
Note:
The terminal block
24
is not included in the delivery.
Now attach the LED spotlight
2
to the bracket
4
using the included
locking screws
3
, spring washers
29
, flat washers
28
and tooth
lock washers
27
(Fig. D).
Adjust the product into the desired direction. For this, you may need
to slacken the locking screws
3
between the bracket
4
and the
LED spotlight
2
. After adjustment, tighten the locking screws
3
again, to ensure a secure hold.
After the fuse has been inserted or the fuse panel is switched on
again, your product is ready for use.
Operation
You can operate the product by using the included remote control
8
.
Note:
Remove the insulating strip from the battery compartment
22
before using the remote control
8
for the first time.
Note:
The product is preset to continuous light mode.
Mode buttons
You can use the Mode buttons
11
to
- switch the product on,
- select the lighting type,
- set, at which light intensity the product is being activated,
- switch the product off.
