7
GB/IE/NI
Charging time:
approx. 7–8 hours
Light on time:
approx. 1 hour for the LED inspection lamp and 4 hours for
the torch (when the rechargeable batteries are fully
charged)
Lifespan of LEDs:
approx. 20,000 hours for the LED inspection lamp;
approx. 20,000 hours for the torch
Protection class:
TÜV SÜD / GS certified
Mains adapter:
Input:
100–240 V∼ 50 / 60 Hz
Output:
6 V
, 0.5 A
Model:
SD-G0600500D
Protection class:
Degree of protection: IP20
Car adapter:
Input:
12 V
Output:
9 V
, 470 mA
Model: TSC002
Replaceable fuse:
F1AL, 250 V∼, ø 5 x 20 mm
Q
Scope of delivery
1 Cordless work light
1 Mains adapter
1 Car adapter for cigarette lighter socket
1 Instructions for use
Safety instructions
DANGER TO LIFE AND RISK OF ACCI-
DENTS FOR INFANTS AND CHILDREN!
Never leave children
alone and unsupervised with the packaging material. There is always
a risk of suffocation if children play with the packaging material. Children often
underestimate risks. Always keep children away from the packaging material.
This product is not a toy.
This product can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the product in a safe way and understand the hazards involved. Children shall
not play with the product. Cleaning and user maintenance shall not be made
by children without supervision.
This product is not a toy and should be kept out of the reach of children. Children
are not aware of the dangers associated with handling electrical products.
Do not use the product if you detect any kind of damage.
CAUTION! DANGER OF EXPLOSION!
Do not operate the
product in potentially explosive environments in which there are
inflammable vapours, gases or dusts.
Protect the product from moisture and damp. Never immerse the product in water
or other liquids!
Connect the product to a properly installed mains socket or a suitable cigarette
lighter socket only. The voltages in each case must comply with information
given in the section “Technical data”.
Ensure that the electrical socket is easily accessible so that you can pull the plug
quickly out of the socket if necessary.
Do not carry out any modifications or repairs to the product yourself. The LEDs
cannot and must not be replaced.
CAUTION!
The protective surround to the LEDs cannot be replaced. Dispose
of the product if you discover cracks or signs of fracture on the protective surround.
Dispose of the product if the product, mains adapter or car adapter is damaged.
Summary of Contents for 285386
Page 3: ...7b B A 6 2 1 5 4 3 9 8 7 ...