8 GB/IE/NI
Safety / Start-up / Operation / Maintenance and Cleaning / Disposal
Replace defective bulbs with new ones immedi-
ately. Before replacing the bulb always remove
the mains plug from the socket.
Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
Do not cover the lamp with objects. Fire can
result from excessive heat development.
Position the lamp so it is protected from moisture
and dirt.
Never leave the light unattended whilst in oper-
ation. Excessive heat can result in a fire.
The LED light is not dimmable.
Do not look directly into the light source (lamp,
LED, etc.). Do not look into the light source
(lamp, LED, etc.) with an optical instrument
(e.g. magnifier).
Start-up
Mounting the light
Remove the packaging materials.
Assemble the light per the illustration.
Your light is now ready to use.
Operation
Using the light
Completely unwrap the power cord
4
.
Insert the mains plug into the socket.
Switch the light on and off using the ON / OFF
foot switch.
Installing / replacing the
illuminant
WARNING! RISK OF ELECTRIC
SHOCK!
Unplug from the mains.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES!
Allow the light
to cool down completely.
Only replace the illuminant when completely
cooled down.
Use a clean, lint-free cloth when replacing the
bulb.
If necessary, unscrew the illuminant from the
socket counter-clockwise
3
. Only use the illu-
minants specified in chapter “Technical Data“.
Carefully screw the new illuminant clockwise
into the socket
3
.
Verify it is seated correctly.
Plug the mains plug into the socket again.
Maintenance and Cleaning
WARNING! RISK OF ELECTRIC
SHOCK!
Remove the mains plug from
the socket before you clean the lamp.
WARNING! RISK OF ELECTRIC
SHOCK!
For electrical safety reasons
do not clean the lamp with harsh deter-
gents and never immerse it in water.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES!
Allow the light
to cool down completely.
Do not use solvents such as petrol and the like,
as they could damage the lamp.
Only use a dry, lint-free cloth for cleaning.
Disposal
The packaging is made of entirely recy-
clable materials, which you may dispose
of at local recycling facilities. Contact
your local community or municipal ad-
ministration for more details on how to
dispose of your worn-out product.
The symbol of the wheelie bin with a line
through it means that the product has to
be disposed of in a separate refuse
