15
GB/IE
Safety
Initial use / Installing the LED strip / Maintenance and cleaning / Disposal
Initial use
Remove all packaging materials before first use.
Do not connect the LED strip to the mains while
it is still in its packaging or while it is rolled up.
Shortening the LED strip
The LED strip can be trimmed.
DANGER TO LIFE BY
ELECTRIC SHOCK!
Disconnect the lights from the power supply before
performing any work on the LED strip
2
. Unplug
the mains adapter
1
from the socket to do so.
Choose the desired LED strip
2
length.
Note:
Ensure that you cut the LED strip
2
at
the right place. The cutting point lies exactly be-
tween the plus and minus pole and is marked
with a black line (see Fig. C).
Shorten the LED strip
2
using a pair of scissors.
Be sure to cover the open end of the LED strip
2
with the adhesive strip
6
before use (see Fig. E).
Installing the LED strip
Note:
Ensure that the installation area is clean,
grease-free and dry. Otherwise the functionality
of the adhesive strip may be impaired.
Note:
Ensure that a plug socket is located in close
proximity to the installation area.
Choose a suitable installation area (window etc.).
Remove the protective foil from the reverse side
of the LED strip
2
(see Fig. B).
Stick the LED strip
2
with the adhesive strip
onto the installation area and press it on firmly.
Remove the protective foil from the reverse side
of the cable hold
3
(see Fig. D).
Stick the cable holder
3
onto the desired
position.
Insert the supply cable
5
in the cable holder
3
.
Plug the mains adapter
1
into the socket.
Your light is now ready to use.
Switching the LED strip on / off
Use the ON / OFF cord switch
4
to switch the
LED strip
2
on or off.
Maintenance and cleaning
Use the ON / OFF cord switch
4
to switch the
LED strip
2
on or off.
DANGER TO LIFE BY
ELECTRIC SHOCK!
Disconnect the lights from the power supply be-
fore performing any work on the LED strip
2
.
Unplug the mains adapter
1
from the socket
to do so.
Do not use solvents, benzene or similar substances.
They could damage the light.
Use a dry, lint-free cloth to clean the LED strip
2
.
Insert the mains adapter
1
into the plug socket.
Your light is now ready to use.
Disposal
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
