21
GB
Introduction / Safety
Technical Data
Model no.:
14131008L, 14131102L
Operating voltage: 230–240 V∼, 50 Hz
Bulb:
model 14131008L:
1 LED module, 4.5 W
model 14131102L:
1 x LED GU10, max. 3 W
Protection class: II /
Safety
Safety notices
Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
RISK OF FATAL
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND SMALL
CHILDREN!
Never leave children unattended with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, when
supervised or instructed in the safe use of the
device and they understand the associated risks.
Do not allow children to play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
RISK OF INJURY!
Do not leave the lamp or packaging material
lying unattended. Plastic film or bags, Styrofoam
etc. can become dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Always check the mains supply and the mains
plug for damage before connecting the light to
the mains. Never use the light if it shows any
signs of damage.
The illuminant in this light must be replaced by
the manufacturer or by an authorised service
technician or similarly qualified person (model
14131008L).
In the event of damage, repairs or other prob-
lems with the light, please contact the service
centre or an electrician.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting socket).
This will pose a risk of fatal injury from electric
shock.
Only touch the insulated area of the mains sup-
ply and the mains plug when connecting to or
disconnecting from the mains!
The flexible outer cable is not replaceable; if
the cable is damaged, the lamp must be dis-
posed of.
Before every use, verify the available mains
voltage matches the required operating voltage
of the light (see „Technical Data“).
Always unplug the mains supply or the plug,
respectively, from the mains prior to assembly,
disassembly, cleaning, or when the light will
not be used for extended periods.
The light bulbs used are
not dimmable.
Safe working
Position the lamp so it is protected from moisture
and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Introduction
