6 GB
Start-up / Maintenance and Cleaning / Disposal / Warranty and Service
Safety / Start-up
CAUTION!
A damaged light bulb means your
life is at risk from electric shock. If there is any
damage, repairs to be carried out or other prob-
lems related to the light bulb, please contact the
service centre or a qualified electrician.
Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
necessary of the light (230–240 V∼).
The light can not be repaired. If the light or the
power cord (secondary cord) is damaged, the
product must be replaced.
Never let the lamp come into contact with water
or other liquids.
Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric
shock.
Avoid the risk of fatal injury
from electric shock
The illuminant in this light is not replaceable;
if the illuminant has reached the end of its life,
replace the entire light.
To avoid danger of
fire and injury
RISK OF INJURY!
Before using the light bulb
always check it for damage. Do not use the
light with a faulty light bulb.
Check the light regularly and before every use
to see if there is any damage to the casing and
mains plug. Never use the light if it shows any
signs of damage.
Do not cover the lamp with objects. Excessive
heat can result in a fire.
RISK OF INJURY FROM BURNS!
Ensure
the lamp has been switched off and allowed to
cool before you touch it. In this way you will
avoid the danger of burns. Bulbs give off a lot
of heat around the top of the lamp.
Do not look directly into the light source (light
bulb, LED etc.).
Do not look at the LED with an optical instrument
(e.g. magnifier).
The light is not suitable for clipping to tubes.
The lamp is not replaceable.
This light is not suitable for external dimmers or
electronic switches.
In order to disconnect the light completely from
the power supply, the light must be removed
from the socket.
Safe working
Use the light in a way where in it protected from
moisture and dirt.
Remain alert at all times and always watch what
you are doing. Always proceed with caution and
do not assemble the lamp if you cannot concen-
trate or feel unwell.
Please familiarise yourself with all the instructions
and diagrams in this manual and with the lamp
itself before using it.
Dispose of the lamp if the lamp glass
1
is
broken or cracked.
Start-up
14109702L
Clip the light on in a suitable location. Make
sure the surface for mounting is dry, smooth, and
free of dust and grease.
Plug the power cable and power plug
5
into
the socket.
Press the ON / OFF line switch
4
to switch the
light on or off.
14109802L
Screw the light down in a suitable location. Make
sure the surface for mounting is dry, smooth, and
free of dust and grease.
Plug the power cable and power plug
5
into
the socket.
Press the ON / OFF line switch
4
to switch the
light on or off.
Bend the flexible lamp arm
3
into the desired
position using the lamp pin
2
.
