7
GB
Start-up / Maintenance and Cleaning / Disposal
Safety advice
Start-up
Mounting the light
Attach the plastic sleeves
7
onto the stand
tubes
14
(model 1308-022L).
Insert the tubes of the floor lamp
14
into the
pre-mounted holes in the base
13
.
Place the serrated lock washers
8
at the
underside of the base
13
onto the tubes
14
.
Screw the nuts
9
clockwise onto the tubes
14
using the open-end spanner
10
to secure the
floor lamp to the base
13
.
Ensure the cables are inside the designated
opening in the base
13
and cannot be
crushed.
Secure the input lead using the strain relief
11
.
Tighten the strain relief
11
using the screws
12
.
Apply the felt cover to the bottom of the base
13
.
Place the uplight dome
1
onto the tube.
Connect the input lead from the base
13
to the
wall power supply
6
.
Plug the mains plug into a socket that has been
professionally installed.
Your light is now ready for operation.
Switching the lamp
on / off
Switch the uplight on or off by turning the
ON/OFF rotary switch
5
to the right / left
(see Fig. A).
Use the ON/OFF switch
3
to switch the
reading lamp on and off.
Dimming the ceiling floodlight
Dim the light of the ceiling floodlight by turning
the ON / OFF rotary switch
5
to the
right / left.
Note:
The light is always set at the lowest
dimming level when it is switched on.
Adjusting the lamp (see fig. B)
Loosen the height adjustment screw
15
and set
the required height for the ceiling floodlight.
Note:
You can adjust the height of the ceiling
floodlight between 1.10 m and 1.80 m.
Re-tighten the height adjustment screw
15
in
order to fix the ceiling floodlight at the required
height.
Bend the flexible arm
2
of the reading lamp
in the required direction.
Do not rotate the flexible arm
2
of the reading
lamp completely. Otherwise the mains cable
inside the lamp could be damaged.
The up-light is hinged and pivoted. Tilt the
up-light to the desired angle.
Maintenance and Cleaning
DANGER OF ELECTRIC SHOCK!
First remove
the mains plug from the socket.
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
DANGER OF ELECTRIC SHOCK!
For elec-
trical safety, never clean the light with water or
other fluids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Disposal
The package and packaging materials
consist entirely of environmentally
friendly materials. They can be disposed
of at your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the Euro-
pean Union, the product has to be
disposed of in a separate refuse collection. This ap-
plies to the product and to all components bearing
this symbol. Do not dispose of products bearing this
symbol in your normal household waste, but
instead they must be taken for recycling to a
