LIVARNO home 1119-R, Installation, Operating And Safety Information

Page: 9 / 28

9
GB/CY
RISK OF INJURY!
Incorrect handling of the product
may potentially result in personal
injury�
„
The light source may only be replaced by
the manufacturer, service technician or a
similarly qualified person.
„
Never look directly into the light source�
„
Do not connect the product to a power
source while still inside the packaging�
There is a risk of overheating!
„
WARNING! DO NOT USE THE LIGHT
CHAIN UNLESS ALL SEALING RINGS
HAVE BEEN PROPERLY MOUNTED�
„
The operating unit is intended exclusively
for use with LED modules�
„
The control gear of this product may only
be replaced by the manufacturer, its
designated service technician, or a similarly
qualified person.
TRIPPING HAZARD! Please make
sure that the power cable
2
is
routed in such a way that nobody
can tread on it or trip over it�
z
Assembly and installation
Please note: Take the product out of its
packaging and remove all packing material�
„
Check that all package contents are
present�
„
Check if the product or individual parts are
damaged� Should you detect damage, do
not use the product� Please contact the
retailer via the service address indicated�
FIRE HAZARD!
Never hang the product above an
open fire or heat source. This may
damage the product and excessive heat
build-up can cause a fire.
RISK OF DAMAGE!
Take sufficient measures to secure
the product from falling down�
Connect power supply
RISK OF ELECTRIC SHOCK!
Plug the connector
5
into the
socket
6
of the mains plug
1
(see
Fig� B)�
„ „
Tighten the union cap
4
on the screw
thread of the connection socket
6
�
„ „
Plug the mains plug
1
into a socket that
has been correctly installed�
Please note: When using outdoors, plug
the mains plug
1
in to an IPX4 socket to
ensure splash protection�
z
Operation
DANGER OF OVERHEATING! Do
not operate the product while it is
still inside the packaging!
Please note: Only use the product with the
supplied mains plug� Do not connect the
product or the mains plug to any external
devices�
Please note: The product stays lit as long
as it is connected to the power supply� If you
unplug it, the product will automatically
switch off�
Timer function
„ „
To activate the timer function, keep the
button
7
on the mains plug
1
pressed
down until the LED light turns green (see
Fig� C)� The timer has now been activated�
„ „
When the timer function is switched on, the
product is switched on for 6 hours and then
switched off for 18 hours�