SETTING THE TIME & DATE
Unscrewed / manual winding position
II
Screwed in and flush with the case
I
Rapid date change
III
Time change
IV
Make sure that your watch is perfectly dry.
Unscrew the crown and move it to position II to manually wind the watch 20 times.
Move it to position III to set the date.
Move it to position IV to set the time.
Avoid changing the date between 8:00 pm and 4.00 am.
Once the changes are made, push the crown back in and screw it down against the case to preserve its
water-resistance.
When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (in this
case, 38 hours) is exhausted and the watch stops. To restart it, unscrew the crown to position II and wind the
movement manually by turning the crown 30- 40 times. This will give it a sufficient power reserve to function
normally.
INSTRUCTIONS:
I II III IV
POSITION
POSITION
POSITION
POSITION
8
User’s Manual
Summary of Contents for GenesisX1
Page 1: ...User s Manual DARE TO LIV...
