- 44 -
Note:
The outdoor sensor must
be located within a maximum
radius of 100 m around the
device, without obstacles.
If more than one outdoor sensor is used:
In the normal time display, press the
channel
button
(33)
to switch between the reception
channels.
The rotation symbol
(6)
will show in the
display that the system is automatically
switching between the different reception
channels.
Only external sensors that are used are
displayed.
Press and hold the
channel
button
(33)
to
remove unused channels or add new
channels.
Note:
The red control LED light
(47)
will flash
briefly while the signal is being transmitted.
Indoor humidity
The current indoor humidity
(13)
is shown on the
display.
The comfort symbols
(22)
show the evaluation of
the room humidity in 3 categories:
< 40%
Dry
40 – 70%
Comfortable
> 70%
Humid
Phases of the moon
Your device is equipped with a
moon phase display
(24)
. The phases of the
moon are:
New moon
Waxing crescent moon
First quarter moon
Waxing gibbous moon
Full moon
Waning gibbous moon
Last quarter moon
Waning crescent moon
Maximum and minimum values
The maximum and minimum temperature and
humidity are saved from the moment the batteries
are inserted.
Press and release the
up
button
(26)
repeatedly to read the maximum
MAX
and
minimum
MIN
values of room temperature
(11)
, room humidity
(13)
and outside
temperature
(7)
, outside humidity
(9)
in the
display
(1)
.
The minimum and maximum values are
automatically deleted every night at 00:00.
Battery level indicator
If the batteries become too weak to keep
the device, the external sensor and the data
transmission in operation, the battery level
indicator
(10)
or
(12)
appears in the display of
the device or the external sensor
(41)
.
The batteries should be replaced as soon as
possible in all devices.
Restart the appliance.
