manualshive.com logo in svg

Little Wonder 5612-12-59, Operator'S Manual

Share
Download
Little Wonder 5612-12-59 Operator'S Manual Download Page 9

9

PRO VAC SP

WARNING LABELS

Warning labels are an important part of the safety system incorporated in this machine.
Replace labels if  damaged or illegible.

LABELS

Maintenance

Before performing any 

service or maintenance, 

disconnect spark plug wire.  

Make sure engine switch if 

in the OFF (O) position.

Rotating Parts

- Caution

Contact with rotating fan will cause 

serious injury.  Keep hands away from 

air intake and discharge areas.

Operaton & Safety 

Manual

- Read and understand 

Operation & Safety 

Manual.

- Replace if lost or 

damaged.

Attention!

- Wear hearing protection.

- Wear eye protection.

Thrown objects

- Keep area clear of people and pets.

- Do not blow towards people or items that may 

be injured or damaged by flying debris.

4171002

Rotating Parts

- Caution

Contact with rotating fac will cause 

serious injury.  Keep hands away from 

air intake and discharge areas.

Vacuuming

Push the rear bail towards the 

handle to move forward.

Pull the front bail back toward 

handle to move in reverse.

4171006

4168759

Rotating Parts

-Cut/Crush/Entanglement hazard.

-Keep hands away from moving part

-Stop engine before servicing.

-Do not operate with cover removed.

910649

LOCK OUT MECHANISM

Summary of Contents for 5612-12-59

















Reviews:

No comments

Brands by name

Popular brands

Load more brands