![background image](http://html1.mh-extra.com/html/little-wonder/5612-12-59/5612-12-59_operators-manual_1929652012.webp)
12
PRO VAC SP
OPERATION
VACUUMING
1. Adjust nozzle to select height by turning the nozzle
control knob and secure position with wing nut.
2. Start the engine and release the dump valve.
3. Release lock out mechanism.
4. Push bail forward to move vaccum forward and pull
back to move in reverse.
Examples of items suitable to be vacuumed
:
-leaves
-dry mulch
-small twigs
-litter
-acorns
-thistles
-seed pods
-small cans
-grass clippings
-paper products
-straw
-styrofoam products
-wood chips
Examples of items/areas to avoid.
-excessively wet surfaces and debris
-gravel surfaces
-large hard objects
-rocks
-long fibrous materials (vines, ropes, string, etc.)
Do not force anything in to the vacuum. If an item is too
large to fit, pick it up separately.
EMPTY DEBRIS BAG
1. Turn off the engine by moving the throttle to the
“SLOW” position. Turn the engine switch to the “OFF”
position. Let the engine come to a complete stop.
2. Roll vacuum to the level unloading location.
3. Open the clasp on band clamp to release bag.
4. Avoid dragging the bag to prolong the bag life.
5. Empty the bag. Handle straps are located on the
under side of the bag for aid in dumping content..
6. Reconnect the bag to the collector.
REMOVING BLOCKAGES / CLOGS
1. Turn off the engine by moving the throttle to the
“SLOW” position. Turn the engine switch to the “OFF”
position. Let the engine come to a complete stop.
2. Remove spark plug wire.
3. Remove bag and/or hose and clear the blockage.
Wear gloves as there may be sharp materials in the
clog.
4. Reinstall the bag and/or hose.
5. Reconnect spark plug wire.