3
6
ENGINE CONTROLS
PLACING ENGINE ON TRACK
With Engine power OFF place Engine on track by doing one of the following:
• Squeeze the track slightly and fit the Rail Lip Edges under the engine guides as shown,
then release the track.
OR
• Before the last two track sections are snapped together, slide the Engine onto
the track as shown, then snap the final track pieces together.
ENGINE POWER
SWITCH
Off / Vol 1/ Vol 2
ENGINE TRAVEL
MODE SWITCH
Push switch backward (1) for
REGULAR TRAVEL MODE
(Engine will continually
move forward.)
Push switch forward (2) for
CRAZY TRAIN MODE
(Engine will reverse
directions at will.)
RAIL
LIP
EDGE
RAIL
LIP
EDGE
ENGINE GUIDES
ENGINE
GUIDES
UNDERSIDE OF ENGINE
UNDERSIDE OF ENGINE
START/STOP
BUTTON
Press top of
smokestack to
start and stop train.
Train will move for 30
seconds then stop.
Press smokestack
to start train again.
ENG
