Little Tikes Highway Assembly Instructions Manual Download Page 2

UK

www.tesco.com

E v e r y l i t t l e h e l p s

2

Notice 

1. This is a "Universal" child restraint; it is approved to ECE 

Regulation 44.04 for general use in vehicles and will fit most, but 
not all, vehicle seats.

2. A correct fit is likely if the vehicle manufacturer has declared in 

the Vehicle handbook that the vehicle is capable of accepting a 
"Universal" child restraint for this group.

3. This child restraint has been declared "Universal" under more 

stringent conditions than those applied to earlier designs which do 
not carry this notice.

4. If In doubt, consult either the child restraint manufacturer or the 

retailer.

Only suitable if the approved vehicles are fitted with a 3 point/with 
retractor safety-belt, approved to UN/ECE Regulation No.16 or other 
equivalent standards.

Assembly:

1. Place the backrest and base on a flat surface. 
2. Align the connector piece on the backrest with the opening on the 

base. Ensure the space is free of the padding. Then, connect the 
backrest and base.

3. Lift up the backrest.

4. Ensure the backrest has locked into the base before use. 

Little Tikes Highway Group 2,3 car seat 15-36kg (33-79lb) 

Problems during assembly? We are here to help:Tesco Stores Ltd. Welwyn Garden City, AL7 1GA, U.K.

Freephone Tesco on 0800 50 55 55. Tesco Ireland Ltd., Gresham House, Marine Road, Dun Laoghaire, Co. Dublin. 

Freephone 1800 248 123, Mon-Sat, 9am-6pm. TESCO QUALITY: We are happy to refund or replace any Tesco product 

which falls below the high standards you expect.Just ask any member of staff.This does not affect your statutory rights.

Summary of Contents for Highway













Reviews: