Little Folks Furniture Classic Hi Sleeper Bed HSP003, Manual

Page: 9 / 28

Fit the ladder (two people)
3 x 75mm bolts, 3 x sleeve nuts, 1 x screw bolt
2 x 60mm bolts + 2 barrel nuts, 2 x 100m bolts + 2 barrel nuts, 8 x small wooden dowels.
At this point in the assembly you will need to decide which side the ladder is fitted, left or
right side of the bed.
Ladder left (Mirror assembly for right hand ladder)
Gently place the ladder up to the left side of the bed, with the ladder cut outs fitting over
the front mattress rail. Loosely connect the 3 x 75mm bolts through the out side of the left
bed leg assembly and into the left ladder leg, pushing in the 3 sleeve nuts into the
matching holes seen in the left hand ladder leg. Rotate to connect but do not tighten.
Now fit the 2 x shorter front safety rails with the wooden dowels (blind holes only) and align
and press fit into both the right hand bed legs and right hand ladder string (some light
flexing of the ladder string might be required here). Once together fit 2 x 60mm bolts
through the ladder string and 2 x 100mm bolts through the bed legs into the safety rails,
connect to barrel nuts and rotate to tighten. Not tighten the left hand ladder assembly.
Finally secure the ladder using the screw bolt from the inside of the bed into the right
hand ladder string.
75mm
75mm
60mm
100mm
Screw bolt
outside of bed inside of bed