Top edge ( note bigger gap)
Fit the drawer runners
12 x Fat screws and 6 x metal drawer runners
Align the drawer runners so that the top slider (wider piece)with the bigger holes is
orientated towards the front edge of the carcass side (see images and video).
Now screw the smaller base plate (narrow piece) of the drawer runner to the
carcass side using the holes provided, you will need to slide the top slider back and
forward to access the base plate holes (second hole in from each end).
2nd hole on base plate
2nd hole on base plate
left side
right side
top slider with holes
orientated at front
edge of sides
fro
nt
edg
e
Connect the sides to the Base
8 x Large Cams (two people)
Insert the 8 large cams into the four large holes in each side, ensuring that the
indicator is facing towards the intersecting cam pin hole.
Place each side onto the base, aligning the cam pins and dowels into the matching
holes. The panels are orientated with the rebate at the back of the unit.
Once the pieces are together rotate the cams to tighten.
base
Right side
Left side
top slider with holes
orientated at front
edge of sides
top slider with holes
orientated at front
edge of sides
QR code for video
rebat
e
rebat
e
Rebate
Summary of Contents for Classic Hi Sleeper Bed HSP003
Page 1: ...Code HSP003 Classic Hi Sleeper Bed...
Page 12: ...Code DSK011 Classic Long Desk...
Page 18: ...Code COD005 Chest of Drawers...
