9
ENG
MEASUREMENT PROCEDURE
1. Insert the Air Tube Plug into the Cuff Jack. Make 3-5
deep inhales and exhales before taking a measurement
and relax. Do not move, do not speak and do not toughen
your arm.
2. Press button O/I.
3. All symbols will appear on the display screen for a short
time, two short sound signals will be given and the Device
will in
fl
ate automatically the air into the cuff.
At
fi
rst the in
fl
ation will stop at the level of 190 mmHg.
4. After reaching the level of 190 mmHg the cuff will gradually de
fl
ate.
The
fi
gures on the screen will count back. The pulse symbol“ ” will start
fl
ickering (Fig. 13).
If irregular pulse rhythm is detected during
measurement, symbol of arrhythmia «
».
will appear upon measurement end. During
periodical appearance of this indication apply
to Your attending doctor.
Apart from numerical value of pressure, result
is also displayed on scale WHO (Fig. 14).
Scale WHO – three-color scale of classi
fi
cation
of received value of arterial pressure,
according to recommendation of World Health
Organization. The scale is available from the left.
AS THE BLOOD PRESSURE AND PULSE ARE
MEASURED DURING AIR DEFLATION FROM THE
ARM CUFF KEEP QUIET AND DO NOT MOVE
YOUR ARM AND DO NOT TOUGHEN YOUR ARM
MUSCLES.
5. When the measurement is complete the sound signal
is given, the arm cuff completely deflates and your
measurement results
fl
ash on the screen (Fig. 15).
6. Press the Button O/I to switch off the Device. For taking
a new measurement repeat all steps described in this
paragraph.
TO OBTAIN THE ACCURATE RESULT MAKE INTERVAL BETWEEN
MEASUREMENTS TO RESTORE THE BLOOD CIRCULATION. WAIT FOR
AT LEAST 3 MINUTES BEFORE MAKING A NEW MEASUREMENT.
Fig. 15
Fig. 14
Fig. 13
