background image

10

ENG

The Device is designed to store automatically the results of each measure-
ment (blood pressure and pulse) in the memory every time a measurement 
is completed. 
THE DATA WILL BE KEPT IN THE MEMORY EVEN IF THE DEVICE IS 
STORED WITHOUT BATTERIES. TO DELETE ALL VALUES STORED IN 
THE MEMORY YOU SHOULD MAKE ACTIONS DESCRIBED IN “MEMORY 
FUNCTION”.
If the Device is ON and is unused for 3 minutes it will be switched off 
automatically. 

AUTOMATIC RE-INFLATION

When during the 

fi

 rst blood pressure measurement the cuff in

fl

 ation to a 

level of 190 mmHg is not suf

fi

 cient or you move your arm the Device stops 

measurement and re-in

fl

 ates the cuff to the higher level. The Device has 4 

fi

 xed levels of the arm cuff in

fl

 ation: 190, 230, 270 and 300 mmHg.

The automatic re-in

fl

 ation is repeated until the measurement is completed 

successfully. This is not a defect.

FORCED DEFLATION FROM A CUFF 

For rapid air release from of the arm cuff during arm cuff in

fl

 ation or during a 

measurement (slow de

fl

 ation) press the O/I Button. 

MEMORY FUNCTION

1. The result of every measurement (blood pressure and 

pulse) is automatically stored in the Device memory. 
IF THE NOTICE ON ERROR APPEARS THE 

MEASUREMENT RESULT WILL NOT BE STORED. 
2. The Device stores up to 30 sets of measured values 

and the average 

fi

 gures of last 3 measurements. When 

the number of measurements exceeds 30, the oldest 

record is deleted to save the most recent values. 
3. The Device stores up to 90 sets of meas-

ured values and the average 

fi

 gures of last 3 

measurements. When the number of meas-

urements exceeds 30, the oldest record is 

deleted to save the most recent values (Fig. 

16). At second pressing on the M Button the 

screen will show for a short time index “1” 

(number of the memory cell) and after this 

the recent measurement result (Fig. 17). 

At each subsequent pressing on the M 

Button the index of the next number of the 

memory cell will 

fl

 ash and the content of this 

cell will be displayed.

Fig. 16

Fig. 17

Summary of Contents for LD5


















Reviews: