11
ENG
7. Do not subject the Device to strong shocks, such as dropping on the fl oor.
8. This Device does not contain special controls to adjust the measurement
accuracy. It is prohibited to open individually the electronic block. Repair the
Device only in authorized organizations.
9. On expiration of the warranted service life apply from time to time to
authorized repair organizations to check the technical condition of the
Device.
10. Dispose of the Device and its components according to the application
local regulations. No special requirements to disposal of this Device are
defi ned by the manufacturer.
11. The arm cuff may withstand multiple sanitary treatments. The internal tis-
sue surface of the arm cuff (contacting on arm) may be cleaned with cotton
ball soaked in 3%-solution of hydrogen peroxide. At long use the partial color
fading of the tissue coating of the arm cuff is possible. Washing and ironing of
the arm cuff are not allowed.
TROUBLESHOOTING TIPS
PROBLEM
LIKELY CAUSE
METHOD OF CORRECTION
After pressing
the Button
no indication
on the display.
Discharge of batteries.
Polarity of batteries is not
observed.
Battery terminals are
contaminated.
Replace all batteries for new
ones.
Install batteries correctly.
Clean the terminals with dry
cloth.
Every time the
blood pressure
is diff erent.
Measurements
are too low/
high.
Check that the arm cuff is
level with your heart?
Check that the arm cuff is
applied correctly?
Perhaps your arm muscles
are tough?
Perhaps you talk or move
your arm during the
measurement?
Take the correct position for
measurement.
Take the correct position for
measurement.
Apply the arm cuff correctly.
Keep silence and quiet
during measurement.
Measurements
of the pulse
rate are too
high/low.
Perhaps you talk or move
your arm during the
measurement?
Perhaps you make
measurement directly after
physical load?
Keep silence and quiet
during measurement.
Repeat the measurement at
least in 5 min.
