Construction Manual
© 2007 Little Cottage Co.
Page 15
The Pennfield Cottage
114
115
116
117
118
113
Set the lower adult door section in place and secure
using 1¼” black headed screws.
With the lower section of door in place, set the adult
door spacer as shown.
Then install the upper door section using 1¼” black
headed screws.
Set the outside case in place and secure using 1¼”
black headed screws. Note that its base must be
flush with (or slightly inset from) the door’s trim.
On the inside of door, slide pin handle through hole,
align, and secure with 1¼” black headed screws.
Hold front catch in position, verify that it is aligned with
bolt, and tighten using 1¼” black headed screws.
Locate the (front) door spacer bar and set in place.
119
120
Set the lower door section in place and secure using
1¼” black headed screws.
