9
How to Use
GeTTING STARTed
Note:
No tools required for setup.
1. Unpack all parts and accessories listed in the LITTER BOX PARTS section of
this Use & Care manual. If applicable, remove any stickers.
2. Find a location for your LitterMaid
®
Litter Box in a clean, dry place.
Note:
For optimal performance, do not place your LitterMaid
®
Litter Box in
moist environment or in direct sunlight.
3. Cut and remove restraints on each end of the rake. Remove packing
material from rake.
Note:
Battery compartment takes 8 "AA" cell batteries. (Batteries not
included.) Battery back-up is optional.
Important:
Do not mix old and new batteries. Do not mix alkaline and
carbon-zinc (standard) batteries. Do not use rechargeable type (Ni-Cad,
Ni-MH or Li-ion) batteries.
PRePARING THe WASTe ReCePTACle
1. Open waste receptacle compartment cover.
2. Place disposable waste receptacle under the
compartment cover.
3. Make sure the front edge of the waste receptacle
is under the five tabs on the front edge of the litter
tray
(B)
.
Note:
There should be no gap between the litter tray
and the waste receptacle.
4. Attach the waste receptacle lid by inserting PUSH
tabs into the round holes. To secure, press in and
down at the positions indicated to slip the edges
of the lid under the tabs on the waste receptacle
compartment cover (both sides)
(C)
.
5. Remove carbon filter from plastic sleeve. Peel
off paper strip to expose the adhesive. Place filter
adhesive side down in diamond-shaped insert in the
center of the waste receptacle lid
(d)
.
6. Close waste receptacle compartment cover.
B
MAX
MIN
C
d
