13
1. To remove the rake for cleaning, press the on/off
button and hold it for 5 seconds.
2. Release the button after 5 seconds and the MODE
indicator light will start blinking.
3. Rake will move forward and stop at the front of the
litter box.
4. With both thumbs, press the two buttons on the safety
bar to release rake
(l)
.
5. Pull rake out
(M)
.
Important:
Do not operate without the rake.
6. Wash the rake with a soft cloth using warm water and
mild detergent. Dry thoroughly.
Note:
Do not use scouring pads or harsh and abrasive
chemicals.
7. Hold rake with both hands and align the two
indentations on the rake with the two buttons
on the safety bar.
8. Push rake into the safety bar until it snaps into place
both on top and on the bottom of the rake (N).
9. Press the on/off button and hold it for 5 seconds, the
mode indicator light stops blinking and rake returns
to home position.
Note:
The rake will automatically return to the home
position, 5 minutes after activating the cleaning cycle.
litter Tray Cleaning
Note:
It is not necessary to clean the tray each time you refill. Litter tray
cleaning is recommended once a month.
1. To remove the litter tray for cleaning, check to make sure rake is in home
position.
2. Turn the on/off button to off.
3. Unplug the unit and remove batteries to prevent accidental activation.
CAUTION: MOTOR STARTS AUTOMATICALLY WITHOUT WARNING. KEEP HANDS, CLOTHING AND CHILDREN
CLEAR OF UNIT.
READ INSTRUCTION MANUAL BEFORE USING.
CAUTION: MOTOR STARTS AUTOMATICALLY WITHOUT WARNING. KEEP HANDS, CLOTHING AND CHILDREN CLEAR OF UNIT.
READ INSTRUCTION MANUAL BEFORE USING.
N
CAUTION: MOTOR STARTS AUTOMATICALLY WITHOUT WARNING.
M
l