Purple Vibe v1.0.1
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
14
Footswitches
The wiring of the footswitch and LED’s
are the last steps. First of wired as true bypass with lamp
cancellation. If you do not want to cancel the lamp then leave out the grey wire from the footswitch
to the
cancel pad
on the PCB:
C
at
hode
(
shor
t
le
g)
Ano
de
(l
on
g
le
g)
Ring
Sleeve
Tip
Tip
Sleeve
R led
C
at
hode
(
shor
t
le
g)
An
od
e
(l
ong
le
g)
Note that this wiring is using a sort of star grounding and the output connector must make good
electrical contact with the enclosure else the grounding will not work properly and the effect might
start to buzz loudly.
