Merlin v1.1
Manufacturer and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
11
When building the Tim™ you will need to add the boost switch. I
n the original the boost
potentiometer has a built in switch, but you can also use a footswitch with a LED to see if the boost is
engaged or not:
Anode (long leg)
Cathode (short leg)
R led
The LEDs requires a resistor (R led in the diagram) depending on the type of LED you are using. An
ultra-bright red, green or blue LED requires a 3k3 resistor, diffuse Green requires 680R. If you want to
be more exact then go here:
http://www.muzique.com/schem/led.htm
