While charging, Battery Pack and Charger
may become warm to the touch and the Charger s
fan may come on. This is normal.
A fully discharged Battery Pack will take
about 1 hour to fully charge.
Page 9
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM FLYING DEBRIS:
Wear long pants, long sleeves and protective footwear. Wear ANSI-approved
safety goggles, dust mask, hearing protectors, and gloves.
Charging Battery Pack
1.
Place Battery Charger on a dry, flat, fireproof
surface indoors.
NOTE :
Allow battery to cool completely before charging.
2. Examine Battery Pack.
Do not charge a cracked,
open, or leaking Battery Pack, or charge a
non-recommended type of Battery Pack.
3. Battery Pack is designed to fit this Charger
specifically. If Battery Pack does not fit Charger
properly, do not try to insert it.
Do not force
Battery Pack into the Charger.
4. Plug Charger into a grounded, 120VAC, 60Hz
receptacle. Green LED will blink, showing that power
is supplied to the charger.
5.
Slide Battery Pack onto Charger. Red LED
will light continuously while charging.
NOTE :
NOTE :
6.
Green LED will light continuously when
Battery Pack is charged. Unplug Charger and
remove Battery Pack when finished.
7.
Allow Battery Pack to cool completely before use.
Installing and Removing Battery Pack
1. To install: Slide Battery Pack into slot on
back of Blower until it clicks into place.
2. To remove: Press both Battery Pack Release
Buttons and pull Battery Pack out of slot.
U1BR27103
WWW.LITHELI.COM
Battery
Pack
Battery Pack
Release
Buttons
