Litheli U1BR27103 Operator'S Manual Download Page 3

Page 3

        

13.

 

Check Damaged Parts - 

                                               Before further use of the 
appliance, a guard or other part that is damaged 
should be carefully checked to determine that it will 
operate properly and perform its intended function. 
Check for alignment of moving parts, binding of 
moving parts, breakage of parts, mounting, and any 
other condition that may affect its operation. A guard 
or other part that is damaged should be properly 
repaired or replaced by a qualified technician unless 
indicated elsewhere in this manual.

14.

 

Wear full eye protection and protective clothing.

15.

 

If electrolyte contacts the skin, wash it off 
immediately with water.

16.

 

If electrolyte contacts the eyes, flush thoroughly 
and immediately with water. Seek medical attention.

Blower Safety

1.

 

Do not put any object into openings. Do not use 
with any opening blocked; keep free of dust, lint, 
hair, and anything that may reduce air flow.

2.

 

Keep hair, loose clothing, fingers, and all parts of 
body away from openings and moving parts.

3.

 

Use extra care when cleaning on stairs.

4.

 

Do not use to pick up flammable or 
combustible liquids, such as gasoline, or 
use in areas where they may be present.

5.

 

Do not pick up anything that is burning or 
smoking, such as cigarettes, matches, or hot 
ashes.

6.

 

Remove all hard objects from work area. Do 
not blow debris in the direction of people, 
animals or property.

7.

 

Use only accessories provided. Keep guards in 
place and in working order.

8.

 

Maintain labels and nameplates on the 
appliance. These carry important safety 
information. If unreadable or missing, contact 
Litheli for a replacement.

9. 

The battery Charger gets hot during 
use. The Charger’s heat can build up to 
unsafe levels and create a fire hazard if 
it does not receive adequate ventilation,

due to an electrical fault, or if it is used in a hot 
environment.
Do not place the Charger on a flammable surface. 
Do not obstruct any vents on the Charger.

Especially avoid placing the Charger on carpets 

also obstruct vents under the Charger.

 

Place the Charger on a stable, solid, nonflammable 
surface (such as a stable metal workbench or 
concrete floor) at least 1 foot away from all 
flammable objects, such as drapes or walls. Keep a 
fire extinguisher and a smoke detector in the area. 
Frequently monitor the Charger and 
Battery Pack while charging.

10.

 

People with pacemakers should consult their 
physician(s) before use. Electromagnetic fields in 
close proximity to heart pacemaker could cause 
pacemaker interference or pacemaker failure.

11.

 

The warnings, precautions, and instructions 
discussed in this instruction manual cannot cover 
all possible conditions and situations that may 
occur. 
It must be understood by the operator that 
common sense and caution are factors which 
cannot be built into this product, but must be 
supplied by the operator.

U1BR27103

WWW.LITHELI.COM

Lithium Battery Safety  Warnings

LITHIUM BATTERIES STORE 
A LARGE AMOUNT OF ENERGY AND 
WILL VENT FIRE OR EXPLODE IF MISTREATED:

1.

 

Keep Battery Pack dry.

2.

 

DO NOT DO ANY OF THE FOLLOWING 
TO THE BATTERY PACK: 

a.  Open,
b.  Drop,
c.  Short-circuit,
d.  Puncture,

e.  Incinerate, 
f.  Expose to temperatures greater than 104°F.

 

3.  Charge Battery Pack only according to its 

Charger’s instructions.

4.  Inspect Battery Pack before every use; 

do not use or charge if damaged.

Summary of Contents for U1BR27103















Reviews: