A
B
B
B
YOUR HOME WI-FI NETWORK
To enable the Lithe Audio Wi-Fi ceiling speakers, your device must be on the same network.
• Ensure your network has a high speed internet connection, as the speakers are designed to
provide you with free online software/firmware updates.
•
High speed DSL / cable modem, or fiber to the home broadband is recommended for best
possible playback of music services.
• Lithe Audio communicates over a 2.4GHz & 5GHz Wi-Fi home network supporting 802.11
a, b, g, n, ac wireless technology only.
• For larger homes where Wi-Fi signal is not stable, we suggest adding access points/mesh
network to strengthen the network or updating your router to a higher specification model
to suit the demand OR connect via hard wired ethernet connection.
• For connections to computer or NAS drive for playing personal music library, we
recommend for best performance connecting via Ethernet cable.
•
LITHE AUDIO APP
• To enhance your listening experience download Lithe Audio app via the app store on your
device follow the setup procedures within this instruction manual.
• The app will allow you to setup singular rooms, groups of speakers or play in Party Mode.
• You can connect up to 30 speakers simultaneously and control them all from the app.
STATUS INDICATOR LIGHT
Located on the front face of the speaker, the LED Indicates the status of your speaker:
•
Red solid:
Speaker booting up
•
Red quick flash (1s 4 times):
Speaker under restart operation
•
Red slow flash (3s 1 time):
Speaker under standby mode, waiting for user operation
•
Green solid:
Speaker is active and connected to Wi-Fi
•
Green slow flash(1s 1 time):
Speaker trying to connect to the preconfigured Wi-Fi
•
Solid purple:
Speaker under WiSA mode
•
Green quick flash(1s 4 times):
Speaker in WAC/SAC mode, user to configure Wi-Fi
ETHERNET CONNECTION
To connect to speaker via ethernet cable use either of the RJ45 ports
The WiFi PRO gives you the ability to daisy chain ethernet connections, reducing cable runs, saving
time and money. Each speaker shall have its own IP address.
NOTE: IF USING POE IN ADDITION TO ETHERNET CONNECTION THEY ARE
SEPERATE
A
B
B
B
10
