Litex CC52AB5C3 Installation Manual Download Page 9

page 8

Warranty.

Parts Replacement.

Troubleshooting.

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely in 
either direction.
3. Check to be sure fan is wired properly.

Problem: 

Light kit (optional) not lighting.

Solutions:

1. Check wall switch to fan.
2. Check that bulbs are installed correctly.
3. Check to be sure wires in outlet box are wired 
properly.

Problem: 

Fan operates but light (optional) fails.

Solutions: 

1. Check that bulbs are installed correctly.
2. Check to be sure wires in outlet box are wired 
properly.
3. Verify that wires in switch housing are 
connected properly with wire nuts.
4. Replace defective bulbs with same type of 
bulb.

LITEX 15-YEAR LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY:  LITEX INDUSTRIES, LTD. will replace or 
repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer 
Service at 1-800-527-1292 to arrange for return of fan. 
Return fan, shipping prepaid, to Litex Industries, Ltd. We will 
repair or ship you a replacement fan, and we will pay the 
return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or 
replace, at no charge to the original purchaser, any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex 
Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
6 to 15-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair 
the fan, at no charge to the original purchaser for labor 
only, if the fan motor fails to operate satisfactorily when 
failure results from normal use. Parts used in the repair will 
be billed to the purchaser at prevailing prices at time of 
repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Litex Industries nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

For parts and information, please refer to
"Parts Inventory" on page 2.
Litex Customer Support:
1.800.527.1292
www.litexfans.com

Summary of Contents for CC52AB5C3










Reviews: