L I T E W E R K S G M B H
|
+ 4 9 ( 0 ) 7 5 3 1 / 9 4 5 2 5 2 5
|
I N F O @ L I T E B L O X . D E
L I T E W E R K S G M B H
|
+ 4 9 ( 0 ) 7 5 3 1 / 9 4 5 2 5 2 5
|
I N F O @ L I T E B L O X . D E
9
8
L I T E W E R K S G M B H
|
+ 4 9 ( 0 ) 7 5 3 1 / 9 4 5 2 5 2 5
|
I N F O @ L I T E B L O X . D E
L I T E W E R K S G M B H
|
+ 4 9 ( 0 ) 7 5 3 1 / 9 4 5 2 5 2 5
|
I N F O @ L I T E B L O X . D E
9
8
1.2
ADVICES
Please pay close attention to the following advices in order to ensure best performance at any time for
maximum product life:
• Refer to this manual for appropriate installation, maintenance & charging.
• Do not remove the
LITE BLOX
battery from its original packaging until required for use.
• Always keep your
LITE BLOX
clean and dry.
• Only use as starter battery on common automotive alternators.
• Pay attention to the plus (+) & minus (–) marks on the
LITE BLOX
battery as well as on the peripherals
to ensure correct use at any time.
• Do not short circuit your
LITE BLOX
& treat as described in this manual.
• Only use appropriate chargers, validated for Lithium Iron Phosphate batteries (LiFePO4).
• Do not mix batteries of different spec, capacity, size or cell chemistry in one application
• Never leave your
LITE BLOX
plugged to a battery charger without attendance.
• Never recharge your
LITE BLOX
at an environment temperature below 0°C.
• Disconnect from the vehicles peripherals when not in use for longer sitting periods.
• Recharge on extended storage periods (>150days when fully charged).
• Do not dismantle, crush, puncture, open or shred your
LITE BLOX
.
• Do not expose your
LITE BLOX
to heat or fire. Avoid exposure to direct sunlight.
• In the event of a chemical reaction of the battery cells, avoid contact with skin or eyes.
1 | S A F E T Y G U I D E L I N E S
1 | S A F E T Y G U I D E L I N E S
1.1
GENERAL
ATTENTION!
Please read the following
instructions carefully.
This manual is an extension to the printed
DIN A6 flyer for „startup & maintenance“
that comes with your
LITE BLOX
battery.
It is part of the product and contains im-
portant notes for correct handling &
maintenance. Therefore please make sure
to store this document at a safe place in
order to have it at hand at all times in
cases of uncertainties and when the
product is passed on.
Fig 1: Flyer „startup & maintenance“