www.litehawk.ca
R
Throttle trim
The throttle trim adjusts the neutral
(centre) point of the throttle control. If
your model is moving forward or
backwards when the Throttle Trigger is at
neutral, turn the trim wheel and this will
adjust the neutral point.
Model Power Switch
Always turn your remote control ON before
turning the model power on.
Steering trim
Run your MINIs on a smooth level surface -
it should drive straight.
- If your MINIs steers to the RIGHT, click
the trim lever LEFT until it drives straight.
- If your MINIs steers to the LEFT, click the
RIGHT trim lever the until it drives straight.
LiteHa
wk
MINIs
Instruction Man
ual
4
Battery:
The rechargeable battery provides the power to propel your model at high speeds. You
should expect 8-12 min run time.
- Once the model starts to slow, drive your model to a safe place, walk over and turn it off.
- Never dead short a Li-Po battery (never touch positive and negative together)!
- You Must FULLY charge the batteries before using your new model.
- Keep the battery dry at all times.
LiteHawk MINIs - Controller Functions
Power Button
Steering:
The steering wheel controls the
MINIs direction. Turn the wheel left to steer to
the left. Turn the wheel to the right and the
MINIs will steer to the right.
Brake/Reverse:
To initiate the brake you
simply push the trigger away from the grip
just past the neutral position. You will
notice the MINIs will stop much quicker. By
pushing the trigger away from the grip a
second time, reverse will be activated.
Throttle:
Forward
drive is initiated by
pulling the throttle
trigger towards the
grip or handle like a
trigger.
Do Not Fully Discharge the battery! Stop and recharge when your MINIs begin
to lose power! Failing to do so will result in irreparable damage to the battery!
