LiteGait 100MX, Operators & Service Manual, Page: 20 / 39

20
www.LiteGait.com
1-800-332-9255
Using Your Lite Gait®
Lite Gait is equipped with a 24 volt battery pack that needs to
be charged at least once per week overnight . Follow instruc-
tions below if you battery looks like this image.
Charging Procedure
1. Insert the charger plug into the port on the actuator top.
2. Plug the charger into the appropriate 110-volt or 220-volt
wall outlet.
3. Leave LiteGait on charger for 6-8 hours or overnight once
per week.
4. After charging LiteGait unplug the charger from the WALL
OUTLET AND LiteGait .
Note: Leaving a charger connected to the LiteGait while dis-
connected to the wall outlet device decreases the battery life
of the LiteGait battery.
Note: Leaving a charger connected to the LiteGait while dis-
connected to the wall outlet device decreases the battery life
of the LiteGait battery.
Low Battery Indicator Alarm
Lite
Gait emits an audible noise when the battery charge is low.
LiteGait will ONLY lift and lower approximately 2 to 3 more
times before shutting off. The charger LED light turns green
when the charger is plugged in and not connected to the
LiteGait. When the battery is charging the LED turns red and
then back to green after the battery is fully charged.
Green Light

The charger is plugged into
the socket (if the battery is
disconnected).

The battery is fully charged
(If the battery is connected
and the charger is plugged
into the socket
Red Light

The battery is being
charged by the charger.