LiteGait 100MX, Operators & Service Manual, Page: 18 / 39

18
www.LiteGait.com
1-800-332-9255
Using Your Lite Gait®
I. Yoke Adjustment
The LiteGait® yoke is raised and lowered manually by
loosening the knobs securing yoke plate to the post.
Once the knobs are loose, the yoke can be raised or
lowered by pulling out the spring pin on the back of the
yoke. After adjusting the yoke to the desired height,
release spring pin and lock into the closest hole on the
back post. Tighten the knobs to secure the yoke once
in place. For the WalkAble 75, the yoke is secured by
tightening the lever knob on the front of the yoke.
Loosen Knobs Pull Out Spring Pin
NOTE: Your Lite Gait® may look different than images above
II. FlexAble
FlexAble allows for the rigid yoke to become position
flexible, with up to 5 inches of travel. Thus, you can
maintain the rigid yoke position
or make it flexible giving
the patient the option to experience more of their
balance and weight bearing at their own discretion.
Flexible Support
Loosen the star knob on the bottom of the FlexAble. The
amount of deflection can be varied by the amount the
knob is loosened
Rigid Support
Tighten the star knob completely on the bottom of the
FlexAble
NOTE: THE LiteGait YOKE & HARNESS PROVIDE FULL
SUPPORT to LiteGait USER WITH FlexAble FLEXIBLE or RIGID.
III. Raising and Lowering MX Yoke
- MX Only
The LiteGait® MX actuator is raised and lowered by a
hand switch with one up and one down arrow.
Raising the Yoke
Verify that LiteGait® has clearance above the yoke.
Depress the button with the up arrow on the hand
switch. Release the button when the yoke is at the
desired height.
Lowering the Yoke
Verify that LiteGait® has clearance below the yoke.
Depress the button with the down arrow on the hand
switch. Release the button when the yoke lowers to
the desired height.
Lowered Yoke Raised Yoke
NOTE: Your Lite Gait® may look different than images above
NOTE: Your Lite Gait® may look different than images above