8-
Note: After finishing the current programming operation, you can hold RELEASE/CLEAR button to
clear all the output before next step operation.
4-3.2 Delete a Chase
1. Press PROGRAM/REC button to enter program mode.
2. Hold DEL button, then tap the CHASE button which you want to delete; all related LED indicators will
flash three times briefly indicating this chase has been deleted.
Note: After finishing the current programming operation, you can hold RELEASE/CLEAR button to
clear all the output before next step operation.
4-4 Assign/Reverse DMX channel
4-4.1 Assign DMX channel
1. Press PROGRAM/REC button to enter program mode.
2. Press button1-16 to select the fixture.
3. Press the FINE and MODE buttons at a time, the Assign LED lights up indicating Assign mode is active.
4. Use Up and Down button to change between the PAN and TILT, the corresponding LED lights indicating
this selection.
5. Tap the PAGE Select button to select Page A or Page B or Page C.