3-
5 NEVER use the unit under the following conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
1
DO NOT dismantle or modify the unit.
3. Overview
3-1. Front View
CA-2416W
1. Scene Buttons (1-8)
Load or store scenes. There are a maximum of 24 programmable scenes
2. Faders
These faders are used to control the intensity of all the channels
3. PAGE Select Button
Used to select page between Page A (1-8), Page B (9-16) and Page C
(17-24).
4. FIXTURE/SCENE Buttons
Press the fixture/scene buttons to enter into scene mode
5. MOVEMENT Button
16
Built-in movement for your convenient use
6. CHASE Button
Press the CHASE button to enter into Chase mode.
7. AUTO/MUSIC/MANUAL
When running the chase, press the button to change the running mode
8. LCD Display
Shows the current activity or programming state.
9. Up/Down Buttons
Press Up/Down button to select chases or adjust the sound sensitivity
ofaudio control
10. TAP/MIDI CH
Change the rhythm of chases or set Midi address
11. Blackout/Stand alone Button
Tap to momentarily pause whole output. Hold on this button enter Stand
alone
12. CHASE Button (1-16)
Running Chase or select fixtures/scanners
13. FINE Button
When Fine is on, the Pan or Tilt wheel will control the scanner in the smallest
increment.
14. PAN Wheel
This jog wheel is used to control the pan of the scanner or for programming.
15. MODE Button
Pressing Fine and Mode buttons to activate Assign
16. PROGRAM/REC Button
Activates Program mode or Record scenes/chases