21
QPiX.144 Mk2
QPiX.144 Mk2 can be mount as single panel due to the yoke on
the backside. Only use suitable hooks/clamps approved by the
BGV C1 for this kind of installation.
NOTE!
The connection elements mounted at the sides and on top and
bottom are only used for alignment – means the connection of
multiple QPiX.144 Mk.2 together. These connection elements
are NOT used for static loads and cannot be used for mounting
of QPiX.144 Mk2!
Make sure to safe the fixture by a safety chain which is specified
at least with a load limit of 12 times of the fixtures weight. Only
safety chain with approved connective can be used. Attach the
safety chain through the yoke as well as to the truss system or
similar and safe attachment point. Assure to close the fasteners
as specified.
or a similar and safe attachment point. Assure to close the fas
teners as specified.
2PiX.80 Mk2
2PiX.80 Mk2 can be mount as single stick due to one of the
both M10 treads on its head. Only use suitable hooks/clamps
approved by the BGV C1 for this kind of installation. Depending
on the unit surroundings the hooks/clamps can be mounted on
top or on side.
NOTE!
Make sure to safe the fixture by a safety chain which is speci-
fied at least with a load limit of 12 times of the fixtures weight.
Only safety chain with approved connective can be used.
Attach the safety chain through the opening on top of the
2Pix.80 Mk2 as well as to the truss system or similar and safe
attachment point. Assure to close the fasteners as specified.
or a similar and safe attachment point. Assure to close the
fasteners as specified.
Mounting of optional diffusor
• The delivery of QPiX.144 Mk2 includes two different diffusor.
• Der standard diffusor „frost“ can be changed to the diffusor
„black“. Lose the side screws of the housing (only one side)
and slide the diffusor out of the housing.
• The mounting of diffusor is made in reverse order.
