Learn more at www.litebook.com
TROUBLESHOOTING GUIDE
IF…
THEN…
The indicator lights are flashing
RED…
If the indicator LEDs remain
RED…
Hold the on/off button down for 5 seconds and release. If
the indicator lights turn GREEN the unit was in the “timer
setting” mode. (The unit will NOT turn on if it is in the “timer
setting” mode.)
Insert a ball point pen or paper clip into the Reset hole (See
Fig. 2 on Pg. 2) on the back of the unit and press until you
hear a soft click. This will reset the internal software.
One GREEN indicator light is
flashing…
The unit needs to be recharged. Plug in the unit for
a minimum of 4 hours.
(The unit can be used while
recharging the battery.)
The white LED lights stay on
for only a few seconds…
The unit needs to be recharged. Plug in the unit for
a minimum of 4 hours.
(The unit can be used while
recharging the battery.)
Indicator LEDs alternate
flashing RED and flashing
GREEN…
Unit needs to be RESET. Insert a ball point pen or paper clip
into the Reset hole (See Fig. 2 on Pg. 2) on the back of the
unit and press until you hear a soft click. This will reset the
internal software.
The unit will not operate…
The unit still does not operate...
This does not correct the
problem…
Insert a ball point pen or paper clip into the Reset hole on
the back of the unit and press until you hear a soft click.
This will reset the internal software.
Ensure the adapter pins are securely attached to the
adapter and the connector is firmly inserted into the power
jack.
Contact The Litebook Company for technical support.
The unit only operates while
plugged into A/C power…
The indicator lights continue
to flash GREEN but DO NOT
turn solid…
Leave the unit plugged in overnight to charge the battery.
Contact The Litebook Company for technical support.
You
can still use the unit while the unit is plugged in.
Post-Warranty Service
After 2 year warranty expires contact the Litebook Company
by telephone or e-mail for repair options and pricing.
9
Register your product online
at www.litebook.com.
