ISO 9001 CERTIFIED
www.liteputer.com.tw
Lite-Puter
EDX-607E [EUM-A]
8
IR remote control on/off
SC5/SC6 overlap scene
function switch
Software version
Clock Synchronization
P.S: There are 2 ways to enter function menu.
One is long hold
FCN
for 3 seconds, then press
FCN
to select functions. The other
is using combined buttons to select certain function then press
FCN
to enter the
setting.
After setting, press
ENTER
to store. Press any scene buttons to exit function setting
without change. The system will exit the setting mode after 60 seconds idling.
2-2
Initialization
Long hold
ENTER
+
SHIFT
+
OFF
at the same time for 3 seconds to initialize
the system.
2-3
DMX Start Channel Setting
STEP-1Press
FCN
+
CH3_UP
at the same time or long hold
FCN
for 3 seconds
to enter function menu and then press
FCN
twice to select function , the
screen will display its DMX start channel address
.
STEP-2Press
▲
or
▼
, DMX ADR (DMX address) will increase or decrease 10
addresses at one time. Press
or
, DMX ADR will increase or
decrease 1 address at one time.
STEP-3After setting, press
ENTER
to save and exit.
2-4
Zone Setting
Zone definition:
User must set the control zone code of EDX-607 before using. This
code has two parts. The first part is zone number and the second is starting channel
address.
The standard DMX console can output 512 channels, while EDX-607 must select 12
continuous channels from these 512 channels. The first channel’s address of the 12
continuous channels is EDX-607’s DMX start channel address.
