Lite-Puter EDX-1210, User Manual

Page: 23 / 25

EDX-1210/EDX-620 [EUM-D] 23
2-19 LCD Off Time Setting
STEP-1: Press
【
FNC
】
to enter the menu. Select " F14: LCD OFF. " , and LCD shows:
It means that the LCD will be turned off by idling 60 seconds.
STEP-2: Press
【

】
or
【

】
to select the time.
2-20 Set Minimum Level of Each Output
STEP-1: Press
【
FNC
】
to enter the menu. Select " F15: Value." , and LCD shows:
The above figure shows that the minimum level of channel 1 is 0%.
Press 【

】 or 【

】 to set minimum level of the channel.
The minimum level can be set from 0% to 40%.
(You can set minimum level to 30% to skip 0-29% brightness to avoid flicker issue)
STEP-2: Press
【

】
or
【

】
to select other channels to set the minimum level.
2-21 Module Bypass
STEP-1: Press
【
FNC
】
to enter the menu. Select " F16:M-PASS " , and LCD shows:
STEP-2:Press
【

】
or
【

】
to select open or close function.
It means that the module 1-3 when Interface cpu damage will Full voltage output ,module 4-6 will
current status remains.