CX-410
DIGITAL 4 CH CHASER
GENERAL FUNCTIONS
1. POWER SWITCH
2. PROGRAMMING DIP SWITCH #1
3. PROGRAMMING DIP SWITCH #2
4. PROGRAMMING DIP SWITCH #3
5. PROGRAMMING DIP SWITCH #4
NOTE; See chase patterns’ chart for selection of programs
6. REVERSIBLE AND AUTO SELECT PROGRAM PATTERN DIRECTION SWITCH
7. FULL ON LIGHT BUTTON
8. SPEED CONTROL with indicator light
9. AUDIO SENSITIVITY CONTROL with indicator light
10. AUDIO CONTROL (3 mode switch)
LEFT (0) = Off
MIDDLE (1) = Chasing speed controlled by audio
RIGHT (2 )= Both Chasing on/ off and speed are controlled by audio
11. DIMMER CONTROL with indicator light
12. STROBE BUTTON; Strobe follows mode selected
13. STROBE (3 mode switch)
LEFT (1) = Strobe is continuous while all 4 channels are
off
until the strobe button is released.
MIDDLE (2)= Strobe is continuous while all 4 channels are
off
until the strobe button is pushed again.
RIGHT (3)= Strobe is continuous while all 4 channels are
on
until the strobe button is pushed again.
14. INDEPENDENT CHANNEL FLASH BUTTONS
15. INDEPENDENT CHANNEL CONTROL (3 mode switch)
LEFT = Off
MIDDLE = Chase (follows chase program patterns)
RIGHT = On (light remains on)
Note; Each independent channel controller includes a light indicator.
16. THE DEFINITION OF DC POWER JECK: inside
『
-
』、
outside
『
+
』
17. AUDIO LINE IN; 100mV L.R.
18. DIGITAL DMX OUTPUT (5-pin XLR connector)
19. DIGITAL DMX OUTPUT (5-pin XLR connector
)
PIN 1 - - G (CHASSIS)
DMX CONNECTORS
PIN 2 - - DATA -
VCC
PIN 3 - - DATA +
PIN 4 - - NC
PIN 5 - - NC
www.audiovias.com
