NA280 Motherboard
15
Hard Disk Drive
NOTE:
If installing two IDE devices on the same ribbon cable, one
device is to be set as “master” and the second as “slave”.
Refer to the IDE device manual for master and slave
settings.
1. Mount the drive into the case.
2. Connect the IDE disk ribbon cable and power cable to the IDE device.
3. Connect the IDE ribbon cable to the motherboard IDE connector
IDE1 or IDE2 (refer to the previous section “Connecting IDE and
Floppy Disk Cables”).
NOTE:
If you are installing a CD-ROM or DVD-ROM IDE device,
connect the audio cable supplied with the device to CD1 or
CD2.
Power Cable
IDE Ribbon Cable
