UNPACKING
•
Remove the shipping box.
•
Check that the appliance has not been damaged during transport. Do not plug
in a damaged appliance under any circumstances! If the appliance is damaged,
please contact your retailer.
•
Remove all tape and packaging material on the inside and outside of the
appliance. Take out the accessories (ice cube tray, egg holder, etc.) that may have
been supplied with the appliance.
b
efore
first
use
•
Clean the inside of the appliance and any accessories provided with lukewarm
water with a little white wine vinegar added to it. Do not use soap or detergent
as the odour may persist. After cleaning, dry the appliance completely.
•
You can use
white spirit
to remove any remaining adhesive from the outside of
the appliance.
IMPORTANT: To clean the appliance, always turn it
off and unplug it, or remove the fuses or turn off the
circuit breaker.
INSTALLATION
i
nstAllAtion
loCAtion
•
The appliance’s energy consumption and efficient operation are affected
by the ambient temperature. For this reason, it is important to follow the
following recommendations:
•
Place your refrigerator-freezer on a stable, level surface. Your appliance will be
heavy when loaded with food: it must, therefore, be placed on a strong, solid
floor.
•
The appliance must be installed in a dry, well-ventilated room at room temperature
(
16°C minimum and 38°C maximum). Make sure you leave a space of at least 10
cm around the appliance.
•
Never place an appliance that emits heat (microwaves, toasters, etc.) on the
refrigerator.
•
The appliance must not be exposed to direct sunlight.
•
This appliance must not be exposed to moisture or rain.
•
The appliance must not be installed next to a radiator, a stove or any other heat
source.
V.1.0
20
Summary of Contents for RDL 145-55b3
Page 2: ...13 V 1 0 2...
Page 87: ......
