ListenClear TV STREAMER, User Manual

Page: 8 / 16

PAGE 8 1-888-320-0424
RAPID AUDIO STATIC
CAUSE POSSIBLE REMEDY
Digital Audio Cable
Refer to the installation instructions for proper installation.
A blue light indicates that an audio signal is being broadcast.
NOTE: The TV Streamer works best with 2-channel
stereo (PCM) and is not compatible with Dolby or DTS
(Surround Sound) audio signal.
• If you are using the Digital audio cable to connect the
TV Streamer to your TV, the settings on your TV must
be adjusted so that Dolby or DTS (Surround Sound)
is turned OFF in order for proper operation to occur.
Some TV sets also have an audio option in which
2-channel stereo (PCM) audio output can be selected.
• If you are using the Digital audio cable to connect the
TV Streamer to your cable receiver box, satellite dish
receiver, DVR receiver, streaming device, or other
input device, that device must be adjusted manually
in its settings so that Dolbyor DTS (Surround Sound)
is turned OFF in order for proper operation to occur.
Most cable, satellite, and streaming devices have an
audio option to do so, or an additional option to select
2-channel stereo (PCM) audio output.
• If possible, use the Analog cable to connect the TV
Streamer to your TV or Home Theater device.
THE FINE PRINT
INTENDED USE
The TV Streamer is intended as a wireless transmitter of sound from a
TV to certain ListenClear wireless hearing aids.
SERVICE AND WARRANTY
Your TV Streamer includes a one-year limited warranty against defects
in material and workmanship. Please ask your hearing care professional
about the duration. All claims must be submitted to Manufacturer WITH
the merchandise and WITHIN the warranty period. Manufacturer will
repair or replace any defective merchandise covered by this warranty at
Manufacturer’s sole discretion during the Term of the manufacturer’s
warranty period. All warranties are void if the merchandise (or any
part thereof) has been misused, abused, tampered with, or modified in