SoundConnect
TM
Manual
6
Specifications
z
Input Connectors: BNC signal-in connected in parallel with signal-in of B&K 7-pin LEMO connector
(The BNC input does not provide microphone powering, e.g.; IEPE)
z
Output Connectors: BNC on front panel in parallel with RCA phono on rear panel.
z
Frequency range: 20 Hz to 100 kHz (± 0.1 dB), -3 dB at 5 Hz and 200 kHz
z
Gain: -20 to 60 ± 0.2 dB in steps of 20 ± 0.1 dB
z
Preamplifier supply: 120V @ 2ma single or ± 14V dual
z
Input Noise: <1.8µVrms (A-weighted), <3.0µVrms (20 - 20 kHz), @ 20 - 60 dB
z
Total Harmonic Distortion: < 0.005%
z
Microphone polarization voltage 0, 28, 200 V ± 1%, Stability better than 0.5% for ±10% variations
in mains-voltage (provided on Lemo Connector)
z
Input impedance: 1 Megohm
z
Output impedance: 600 ohms
z
Output attenuator: 0 dB (7.07 V
P
), -8 dB (2.82 V
P
), -14 dB (1.41 V
P
) ± 0.1 dB
z
Peak Level Meter: Indication at -20, -10, 0 dB, and overload relative to selected output range ± 0.5
dB.
z
Power Requirements: 115/230 VAC ± 10% switchable, 50 - 60 Hz, detachable IEC power cord
z
Dimensions: 5.5"H (139.7 mm), 2.5" W (63.5 mm), 7.5" D (190.5 mm)
z
Weight: 2 lb. (910 g)
z
Operating Temperature: 0° to 35° C
Accessories Included
z
Power cord
z
Spare fuse
z
User Manual
Contact Information
Contact the Listen office at 617-556-4104, Monday thru Friday, between 9 AM and 5 PM EST.
or email:
Sales -
Technical Support -
© Listen, Inc 2006 - 2015. All rights reserved.
SoundCheck
®
, HarmonicTrak™, STWEEP™, SoundCheck ONE™, SoundMap™, NoiseCheck™,
SoundConnect™, DC Connect™, AmpConnect™, AmpConnect ISC™, SC Amp™, SoundConnect 2™,
AudioConnect™ and AudioConnect 4x4™ are trademarks of Listen, Inc.
Rev 043015