7
Locate Parts
Locate parts C, D, E and the machine screws.
The remaining parts and one of the machine
screws will not be used in this configuration.
Remove Screws from Unit 1
Remove and discard the four outer screws
from the bottom of unit 1.
Remove Feet from Unit 2
Remove and discard the four feet from
the bottom of unit 2.
Install Part C
Install part C to the right side of unit “1” using
two screws. Use the set of holes toward the
front of the bracket, making this part flush
with the front edge.
Remove Screw
Remove the screw that is near the input
1 connection on the rear of unit “1”.
Install Part D
Install part D to both units using
5 screws.
Mount
Mount in the rack.
DUAL (LT-800 & LW-100) CONFIGURATION
1
2
3
4
Install Part E
Install part E to the left side of unit “2”
using two screws. Use the set of holes
toward the front of the bracket, making
this part flush with the front edge.
5
6
7
8
Part D
Bottom of Unit 2
Bottom of Unit 2
Part C
Part E
