Listen Technologies LT-800-150, User Manual

Page: 13 / 28

9
- +
XLR Wiring 1/4” Phone Wiring
Back of LT-800 with XLR connected to Input 1
Line
Mic
Mic with
Phantom
Power
LT-800 Setup Instructions (cont.)
Connect Audio Inputs
The LT-800 has two audio input options: Input 1 and Input 2. Input 1 is a balanced connection using
either an XLR or 1/4” phono connector. Input 2 has two unbalanced mixing phono connectors.
Use Input 1 if you are using a microphone or if you have a balanced connection such as from a
professional audio mixer (you can also use Input 1 for unbalanced connections). Use Input 2 to
connect to an unbalanced audio source.
Input 1
Input 1 offers a choice of balanced XLR
or 1/4” phono connector.
Plug your microphone into Input 1 and move
the input select switch to Mic (for dynamic
microphones) or Mic + PH Power (for condenser
microphones).
Plug your balanced or unbalanced audio source
into Input 1. Use the following diagram.
Input 2
Plug your unbalanced audio source into Input 2 and select the audio
level switch for -10 dBu or +10 dBu, to match the audio level coming
from your equipment.
7
12 VDC 1.3 A